Lumenier ELITE PRO 100A V2 6-12S BLHeli_32 4-in-1 ESC

NOTE - As BLHeli_32 support has ended, instead of becoming discontinued, these ESC's now ship with custom, locked firmware. They cannot be re-flashed, and no configuration changes can be made. However, stock ESC settings work great for almost all applications.

The Lumenier ELITE PRO 100A V2 12S BLHeli_32 4-in-1 ESC is a powerful ESC with the latest BLHeli_32 + telemetry and current sensor capable of 100A constant current and up to 12S (52V) input. The CNC aluminum heatsink provides excellent cooling required for high-power setups often required in Cinema and heavy lift drones. The 4-in-1 design simplifies the installation, allowing for 4x ESCs all on one board with a simple plug-and-play cable to connect to your flight controller and BLHeli_32 passthrough for easy programming and firmware updates. If you're looking for maximum power and performance for your drone or aircraft, this is the ESC for you.

New in Version 2

New more robust 16V 2A BEC circuit. Handles voltage spikes without issue!

Improved heatsink design for optimized cooling and easier mounting

Features

Supports Dshot300, Dshot600, Dshot1200, MultiShot, OneShot, and normal PPM 1-2us

The one-sided Mosfet design reduces noise and provides better heat dissipation

Superb PCB circuit design and 8oz thick copper ensures high-current capability

Cortex M4 32-bit processor runs with 120M Hz frequency

High-voltage low resistance 100V, 1.5mΩ Mosfet

30.5x30.5m and 86x66mm Mounting Patterns

Supports High Demag Compensation

16V 2A BEC onboard to power flight controller

12S High-voltage support (52V)

Supports Bidirectional + Dshot

Optimized BLHeli_32 Firmware

Supports PWM 8-48kHz

HIGH PERFORMANCE CUSTOM HEATSINK

The custom heatsink design provides improved heat dissipation making this ESC a perfect choice for high power needs found in Cinelifters, large drones, and high-performance racing drones. The heatsink effectively cools the ESC allowing for reliable operation even in challenging environments.

BLHELI_32 FIRMWARE AND LIVE TELEMETRY

The Lumenier ELITE PRO 100A 12S BLHeli_32 4-in-1 ESC is a 32-bit ESC running the latest generation BLHeli_32 firmware. The 32-bit architecture enables the ESC to run at incredible speeds resulting in better performance, faster input signals, and lower latency compared to older 8-bit ESCs. This ESC also features a live telemetry connection for more advanced flight controllers, as well as a top-of-the-line current sensor.

HEAVY DUTY COPPER TRACES

One of the biggest features of this ESC is the heavy-duty copper traces (8oz) which can support extreme current. Additionally, the ESC PCB is 2mm thick and layered on a 2nd PCB of 1mm for a total of 3mm. More copper along with the included aluminum heatsink allows you to push more power to your drone.

BENEFITS OF BLHELI_32 FIRMWARE ON 32-BIT ESC

32-bit processors run faster than 8-bit, at which we can expect better performance from the new 32-bit ESCs. Faster input signals with lower latency and higher update rate would be possible, such as Dshot1200 or even faster protocols! (Read about DSHOT) (Read about DSHOT1200)

The 32-bit platform also allows more functionality and features that simply weren't possible on 8bit ESCs, such as:

Improved direction change in the Bidirectional mode

Auto-timing for higher efficiency and reliability

Configuring from FC using DShot commands

Adjustable “Brake on Stop” force

Programmable PWM frequency

Voltage/Current limiting

RGB LED control

ESC Telemetry

Specifications

Supports: Dshot300, Dshot600, Dshot1200, MultiShot, OneShot, and normal PPM 1-2us.

Mounting Patterns: 30.5x30.5m / 86x66mm

Processors: Cortex M4 32-Bit 120Hz

16V BEC onboard to power flight controller

Dimensions: 98mmx72mmx15mm

Continuous Current: 100A x4 ch

Peak Current: 120A x4 ch

Supports: PWM 8-48kHz

Firmware: BLHeli_32

Mosfet: 100V, 1.5mΩ

Voltage: 6-12S

Weight: 113g

Includes

1x Lumenier ELITE PRO 100A V2 6-12S BLHeli_32 4-in-1 ESC

2x 8pin JST Breakout Cable (short 70mm)

2x 8pin JST Breakout Cable (long 120mm)

2x 10AWG 200°C Wire - Black / Red 160mm

1x 63V 1800uF Capacitor

5x M3 Rubber Grommets

1x Plastic Hardware set (M3 spacers, screws, nuts)