Flycolor Trinx G20 ESC 60A BLHeli32 4in1 ESC

Enhance your drone's performance with the Flycolor Trinx G20 60A 4-in-1 BLHeli_32 ESC. Boasting a compact and lightweight design, this ESC is optimized for racing drones, featuring a 20x20mm mounting configuration with M3 screws. With advanced features like a high-frequency PWM up to 128K for smoother operation, optimized firmware for enhanced throttle linearity and faster response, and support for various pulse width inputs including Oneshot125 and Multishot, the Trinx G20 ensures a seamless and powerful flight experience. The inclusion of a built-in current sensor, VBAT output, and conformal coating for extra protection makes it a reliable choice for your FPV drone and cinematography endeavors.

Features:

Supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5- 25us). The input signal is automatically detected by the ESC upon power-up.

Compared with the previous generation of ESC, the ESC firmware is optimized, making the throttle linearity smoother and the response faster.

Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.

PWM frequency up to 128K, high frequency for higher throttle makes running smoother.

20x20 mounting holes to meet the installation requirements of diversified frames.

Supports higher power load, more suitable for violent flight of racing drones.

Miniaturized and lightweight design, better routing, and component layout.

ARM 32-bit Cortex MCU STM32G0, frequency up to 64 MHz.

Low ESR capacitor and XT60 cable included

All Dshot and Proshot signals are supported.

Built-in current sensor and VBAT output.

Conformal coating for extra protection

Large soldering tabs

Flycolor Trinx G20 Specs

Continuous Current: 60A

Burst Current: 70A (for 10 seconds)

Max PWM Frequency: 128KHz

Features: Built-in current sensor and VBAT output

Supported Protocols: DShot600, DShot300, Oneshot125, Oneshot42, Multishot, Proshot

BEC: None

Input Voltage: 3S-6S LiPo

Mounting: M3 screws, 20x20mm pattern

Firmware: BLHeli_32

Firmware Target: Flycolor_Raptor_5

Dimensions: 44x36x6.3mm

Weight:

Without heatsink: 15.4g

With heatsink: 18.3g

Package Includes:

1 x Flycolor Trinx G20 60A 3-6S BLHeli32 4in1 ESC - 20x20mm